Basic RPM Tutorials

Basic RPM Tutorials

Introduction:

RPM is the RPM Package Manager. It is an open packaging system available for anyone to use. It allows users to take source code for new software and package it into source and binary form such that binaries can be easily installed and tracked and source can be rebuilt easily. It also maintains a database of all packages and their files that can be used for verifying packages and querying for information about files and/or packages.
Red Hat, Inc. encourages other distribution vendors to take the time to look at RPM and use it for their own distributions. RPM is quite flexible and easy to use, though it provides the base for a very extensive system.

RPM Basic usage command
In its simplest form, RPM can be used to install packages:
rpm -i foobar-1.0-1.i386.rpm
The next simplest command is to uninstall a package:

rpm -e foobar

While these are simple commands, rpm can be used in a multitude of ways. To see which options are available in your version of RPM, type:

rpm –help
You can find more details on what those options do in the RPM man page, found by typing:
man rpm

Let’s say you delete some files by accident, but you aren’t sure what you deleted. If you want to verify your entire system and see what might be missing, you would do:

rpm -Va

Let’s say you run across a file that you don’t recognize. To find out which package owns it, you would do:

rpm -qf /usr/X11R6/bin/xjewel

Now you want to see what files the koules RPM installs. You would do:

rpm -qpi koules-1.2-2.i386.rpm

Building RPMs

The basic procedure to build an RPM is as follows:

  • Get the source code you are building the RPM for to build on your system.
  • Make a patch of any changes you had to make to the sources to get them to build properly.
  • Make a spec file for the package.
  • Make sure everything is in its proper place.
  • Build the package using RPM.

The Spec File

Here is a small spec file (eject-2.0.2-1.spec):

Summary: A program that ejects removable media using software control.
Name: eject
Version: 2.0.2
Release: 3
Copyright: GPL
Group: System Environment/Base
Source: http://metalab.unc.edu/pub/Linux/utils/disk-management/eject-2.0.2.tar.gz
Patch: eject-2.0.2-buildroot.patch
BuildRoot: /var/tmp/%{name}-buildroot
%description
The eject program allows the user to eject removable media
(typically CD-ROMs, floppy disks or Iomega Jaz or Zip disks)
using software control. Eject can also control some multi-
disk CD changers and even some devices' auto-eject features.
Install eject if you'd like to eject removable media using
software control.
%prep
%setup -q
%patch -p1 -b .buildroot
%build
make RPM_OPT_FLAGS="$RPM_OPT_FLAGS"

%install
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/usr/bin
mkdir -p $RPM_BUILD_ROOT/usr/man/man1

install -s -m 755 eject $RPM_BUILD_ROOT/usr/bin/eject
install -m 644 eject.1 $RPM_BUILD_ROOT/usr/man/man1/eject.1

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-,root,root)
%doc README TODO COPYING ChangeLog

/usr/bin/eject
/usr/man/man1/eject.1

%changelog
* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
- auto rebuild in the new build environment (release 3)

* Wed Feb 24 1999 Preston Brown <pbrown@redhat.com>
- Injected new description and group.

[ Some changelog entries trimmed for brevity.  -Editor. ]
 

The Header
The header has some standard fields in it that you need to fill in. There are a few caveats as well. The fields must be filled in as follows:
The header has some standard fields in it that you need to fill in. There are a few caveats as well. The fields must be filled in as follows:

  • Summary: This is a one line description of the package.
  • Name: This must be the name string from the rpm filename you plan to use.
  • Version: This must be the version string from the rpm filename you plan to use.
  • Release: This is the release number for a package of the same version (ie. if we make a package and find it to be slightly broken and need to make it again, the next package would be release number 2).
  • Copyright: This line tells how a package is copyrighted. You should use something like GPL, BSD, MIT, public domain, distributable, or commercial.
  • Group: This is a group that the package belongs to in a higher level package tool or the Red Hat installer.
  • Source: This line points at the HOME location of the pristine source file. It is used if you ever want to get the source again or check for newer versions. Caveat: The filename in this line MUST match the filename you have on your own system (ie. don’t download the source file and change its name). You can also specify more than one source file using lines like:
Source0: blah-0.tar.gz
Source1: blah-1.tar.gz
Source2: fooblah.tar.gz

These files would go in the SOURCES directory. (The directory structure is discussed in a later section, “The Source Directory Tree”.)
·  Patch: This is the place you can find the patch if you need to download it again. Caveat: The filename here must match the one you use when you make YOUR patch. You may also want to note that you can have multiple patch files much as you can have multiple sources. ] You would have something like:

Patch0: blah-0.patch
Patch1: blah-1.patch
Patch2: fooblah.patch

These files would go in the SOURCES directory.
Group: This line is used to tell high level installation programs (such as Red Hat’s gnorpm) where to place this particular program in its hierarchical structure. You can find the latest description in /usr/doc/rpm*/GROUPS.
·  BuildRoot: This line allows you to specify a directory as the “root” for building and installing the new package. You can use this to help test your package before having it installed on your machine.
·  %description It’s not really a header item, but should be described with the rest of the header. You need one description tag per package and/or subpackage. This is a multi-line field that should be used to give a comprehensive description of the package.

Prep

This is the second section in the spec file. It is used to get the sources ready to build. Here you need to do anything necessary to get the sources patched and setup like they need to be setup to do a make.
One thing to note: Each of these sections is really just a place to execute shell scripts. You could simply make an sh script and put it after the %prep tag to unpack and patch your sources. We have made macros to aid in this, however.
The first of these macros is the %setup macro. In its simplest form (no command line options), it simply unpacks the sources and cd‘s into the source directory. It also takes the following options:

  • -n name will set the name of the build directory to the listed name. The default is $NAME-$VERSION. Other possibilities include $NAME${NAME}${VERSION}, or whatever the main tar file uses. (Please note that these “$” variables are notreal variables available within the spec file. They are really just used here in place of a sample name. You need to use the real name and version in your package, not a variable.)
  • -c will create and cd to the named directory before doing the untar.
  • -b # will untar Source# before cd‘ing into the directory (and this makes no sense with -c so don’t do it). This is only useful with multiple source files.
  • -a # will untar Source# after cd’ing into the directory.
  • -T This option overrides the default action of untarring the Source and requires a -b 0 or -a 0 to get the main source file untarred. You need this when there are secondary sources.
  • -D Do not delete the directory before unpacking. This is only useful where you have more than one setup macro. It should only be used in setup macros after the first one (but never in the first one).

The next of the available macros is the %patch macro. This macro helps automate the process of applying patches to the sources. It takes several options, listed below:

  • # will apply Patch# as the patch file.
  • -p # specifies the number of directories to strip for the patch(1) command.
  • -P The default action is to apply Patch (or Patch0). This flag inhibits the default action and will require a 0 to get the main source file untarred. This option is useful in a second (or later) %patch macro that required a different number than the first macro.
  • You can also do %patch# instead of doing the real command: %patch # -P
  • -b extension will save originals as filename.extension before patching.

That should be all the macros you need. After you have those right, you can also do any other setup you need to do via sh type scripting. Anything you include up until the %build macro (discussed in the next section) is executed via sh. Look at the example above for the types of things you might want to do here.

Build

There aren’t really any macros for this section. You should just put any commands here that you would need to use to build the software once you had untarred the source, patched it, and cd’ed into the directory. This is just another set of commands passed to sh, so any legal sh commands can go here (including comments).
The variable RPM_OPT_FLAGS is set using values in /usr/lib/rpm/rpmrc. Look there to make sure you are using values appropriate for your system (in most cases you are). Or simply don’t use this variable in your spec file. It is optional.

Install

There aren’t really any macros here, either. You basically just want to put whatever commands here that are necessary to install. If you have make install available to you in the package you are building, put that here. If not, you can either patch the makefile for a make install and just do a make install here, or you can hand install them here with sh commands. You can consider your current directory to be the toplevel of the source directory.
The variable RPM_BUILD_ROOT is available to tell you the path set as the Buildroot: in the header. Using build roots are optional but are highly recommended because they keep you from cluttering your system with software that isn’t in your RPM database (building an RPM doesn’t touch your database…you must go install the binary RPM you just built to do that).

Optional pre and post Install/Uninstall Scripts

You can put scripts in that get run before and after the installation and uninstallation of binary packages. A main reason for this is to do things like run ldconfig after installing or removing packages that contain shared libraries. The macros for each of the scripts is as follows:

  • %pre is the macro to do pre-install scripts.
  • %post is the macro to do post-install scripts.
  • %preun is the macro to do pre-uninstall scripts.
  • %postun is the macro to do post-uninstall scripts.

The contents of these sections should just be any sh style script, though you do not need the #!/bin/sh.

Files

This is the section where you must list the files for the binary package. RPM has no way to know what binaries get installed as a result of make install. There is NO way to do this. Some have suggested doing a find before and after the package install. With a multiuser system, this is unacceptable as other files may be created during a package building process that have nothing to do with the package itself.
There are some macros available to do some special things as well. They are listed and described here:

  • %doc is used to mark documentation in the source package that you want installed in a binary install. The documents will be installed in /usr/doc/$NAME-$VERSION-$RELEASE. You can list multiple documents on the command line with this macro, or you can list them all separately using a macro for each of them.
  • %config is used to mark configuration files in a package. This includes files like sendmail.cf, passwd, etc. If you later uninstall a package containing config files, any unchanged files will be removed and any changed files will get moved to their old name with a .rpmsave appended to the filename. You can list multiple files with this macro as well.
  • %dir marks a single directory in a file list to be included as being owned by a package. By default, if you list a directory name WITHOUT a %dir macro, EVERYTHING in that directory is included in the file list and later installed as part of that package.
  • %defattr allows you to set default attributes for files listed after the defattr declaration. The attributes are listed in the form (mode, owner, group) where the mode is the octal number representing the bit pattern for the new permissions (like chmod would use), owner is the username of the owner, and group is the group you would like assigned. You may leave any field to the installed default by simply placing a  in its place, as was done in the mode field for the example package.
  • %files -f <filename> will allow you to list your files in some arbitrary file within the build directory of the sources. This is nice in cases where you have a package that can build it’s own filelist. You then just include that filelist here and you don’t have to specifically list the files.

The biggest caveat in the file list is listing directories. If you list /usr/bin by accident, your binary package will contain every file in /usr/bin on your system.

Building It

The Source Directory Tree

The first thing you need is a properly configured build tree. This is configurable using the /etc/rpmrc file. Most people will just use /usr/src.
You may need to create the following directories to make a build tree:

  • BUILD is the directory where all building occurs by RPM. You don’t have to do your test building anywhere in particular, but this is where RPM will do it’s building.
  • SOURCES is the directory where you should put your original source tar files and your patches. This is where RPM will look by default.
  • SPECS is the directory where all spec files should go.
  • RPMS is where RPM will put all binary RPMs when built.
  • SRPMS is where all source RPMs will be put.

Building the Package with RPM

nce you have a spec file, you are ready to try and build your package. The most useful way to do it is with a command like the following:

rpm -ba foobar-1.0.spec

There are other options useful with the -b switch as well:

  • p means just run the prep section of the specfile.
  • l is a list check that does some checks on %files.
  • c do a prep and compile. This is useful when you are unsure of whether your source will build at all. It seems useless because you might want to just keep playing with the source itself until it builds and then start using RPM, but once you become accustomed to using RPM you will find instances when you will use it.
  • ido a prep, compile, and install.
  • b prep, compile, install, and build a binary package only.
  • abuild it all (both source and binary packages).

There are several modifiers to the -b switch. They are as follows:

  • –short-circuit will skip straight to a specified stage (can only be used with c and i).
  • –clean removes the build tree when done.
  • –keep-temps will keep all the temp files and scripts that were made in /tmp. You can actually see what files were created in /tmp using the -v option.
  • –test does not execute any real stages, but does keep-temp.

Reference:
http://www.ibiblio.org/pub/linux/docs/HOWTO/other-formats/html_single/RPM-HOWTO.html

Tagged : / / / / / / /